Set screws are under the comp to keep a cleaner look
Includes instructions and EVERYTHING needed for install
Installs in about 2 minutes
Adds approximately 1.2-1.3" to gun length
**Customers using OEM threaded barrel will have a bigger gap between slide and comp due to how long the OEM threaded barrel is. (See Picture)
*We tested several brands of factory 115gr and 124gr ammo with a factory recoil spring in a P-10C with absolutely no issues. *We still recommend using a 15lb recoil spring as these guns are very over sprung from the factory.*
*Remanufactured ammo is known to be loaded weak and may cause cycling issues.
*Always test that your ammo cycles fine before carrying with Stealth Comp. You may need to go down to a 15lb or lighter recoil spring if you're seeing cycling issues.
**These are made for 9MM P-10C's ONLY. While they will fit any 1/2-28 9MM threaded barrel, we CAN NOT guarantee proper function with other guns and we will NOT accept returns on comps bought that did not work on other guns!
*DO NOT OVER APPLY LOCTITE TO SET SCREWS. DO NOT OVER TIGHTEN SET SCREWS! WE WILL NOT REPLACE COMPS WITH STUCK/STRIPPED SET SCREWS!